CAR WASH TUNNEL TYPE

The reliability and versatility of the equipment is the key to the success of your business

Conveyor WashTec tunnel type sinks

Solutions that allow you to complete a conveyor sink for any object.

Проиграть видео

Maximum versatility for your car wash business: WashTec company offers you schemes for building a conveyor car wash with a wide selection of different modules for washing, drying and care. Combine them depending on the flow of cars, available space and the needs of your customers. We accompany you at all stages of the process from idea to implementation. Including in terms of payment systems, water treatment and the use of detergents. Trust our experience: together we will find the optimal solution for your success.

There are no identical tunnel sinks. Each location has completely different requirements for the sink in terms of occupied space, capacity and configuration. With the modular concept of the WashTec conveyor washer, you will find the optimal solution for your needs.

Do you have a question?

Get expert advice

Fill in the form fields, our specialist will call you back soon.

    Conditional division of conveyor washing into technological zones

    The modular system of tunnel equipment from WashTec company allows you to optimally complete your car wash complex depending on the location, capacity and land area.

    Pre-washing area

    The main task of the pre-washing zone is to prepare the car for washing in the tunnel. With the help of stationary AVDs, large dirt and sand are manually removed from the wheels, wheel arches and the lower part of the car body.

    Guide plate

    The movable plate helps the driver to direct the car to the conveyor belt.
    Plastic side roller bumpers ensure safe contact with the tire.
    The plate moves only when in contact with the wheels.

    Steel Conveyor Chain

    The safety of the tires is guaranteed by smooth plastic linings.
    The height of the 76 mm structure reliably prevents the car from colliding with the conveyor.
    The pushing rollers are not demanding for maintenance, they allow the wheel to rotate for better cleaning.

    Plastic Conveyor

    Minimal impact of the plastic construction on the tires of the car.
    The design of the tape is made of wear-resistant plastic.
    The construction height of 60 mm prevents the tires from contacting the edge of the tape.

    The area of application of detergent
    "Foam Sensation"

    Completely covers the car with a thick foam layer. The LED backlight with changeable color turns the washing process into an element of the show. The module can be integrated into the entrance arch or installed as a separate unit.

    Contour system for applying detergent

    Provides uniform application of a pre-detergent on the car, which helps to soften dirt.

    Horizontal wheel and sill washer

    Cleaning of wheels and thresholds with one unit. Complete cleaning of the wheels due to the length of the unit 2.5 m. Optionally supplied with high pressure washer nozzles.

    Accompanying brush wheel washer

    Washing of disks with a rotating brush with wheel accompaniment for 1 m.
    Synchronization with the speed of the pipeline.
    Optionally supplied with high pressure washer nozzles.

    High-pressure water washing
    BPS-system for optimal cleaning

    BPS pendulum nozzles with up-and-down swing are located on top and on the sides to ensure optimal washing of thresholds, upper and side surfaces.
    An additional mechanism turns the nozzles towards and after the car to clean the front and rear parts of the car.
    Pressure up to 70 bar.

    High-pressure washing along the contour

    Washing along the contour of the car from a close distance is provided by rotary beams equipped with high-pressure injectors.
    The maximum effect is achieved for the front and rear parts of the car using an accompanying high-pressure station.
    The pressure is 70 bar.

    Washing the bottom with high pressure

    Washing the bottom thoroughly removes the remnants of salt and dirt.
    22 nozzles clean the bottom, 2 nozzles are angled outward to clean the wheel arches.
    The pressure is 70 bar.

    Brush Station

    Thanks to the modular concept, the upper and side brushes are selected according to the needs of a particular place. These brush modules are installed for conveyors with a speed from 4.5 to 12 m/min. Based on the speed of the conveyor, electronically controlled, linearly accompanying side brushes with a stroke length from 450 to 1.250 mm are selected. Hot-dip galvanized steel frames are painted with powder paint, or made of stainless steel. The upper and side brushes accelerate briefly when rounding the contours of the car – to ensure effective contact of the brushes with a moving car.

    The right material for gentle washing

    SofTecs® is a very soft material made of foamed polyethylene that gently washes even the most sensitive paint coatings without leaving even the smallest traces.

    The brush material is very wear-resistant — the resource is up to 200,000 washed cars, 90% of new WashTec sinks are equipped with SofTecs® brushes.

    Polishing station

    The polishing station will expand your car polish care service. A variety of programs attract customers and allow you to increase the amount of the average check. The polishing station consists of a system for applying special products (waxes), as well as a brush station that gently polishes them on the surface of the car.

    Blow Drying station

    The execution of «contour bending and tracking» increases the exposure time on the car by 30%, thereby improving the drying result.
    Following the upper drying nozzle along the contour of the car allows blowing from a close distance, which optimizes the drying process and saves electricity.
    The system of lifting the drying nozzles with double belts and with a belt breakage control system on each side guarantees safety.
    The rotary upper nozzles occupy an optimal position depending on the position of the vehicle.
    The integral blowing effect improves the drying of the side surfaces.

    Side drying mirrors

    Efficient drying of mirrors, side surfaces and the rear of the car.
    Two independently operating drying systems of 3 kW each. It can be installed before the main drying or monoblock.
    Aluminum nozzles coated with powder paint. Optionally, it is possible to use drying only for the side surfaces.

    Traffic light

    At the final stage of drying, the customer sees a countdown at the traffic light until permission to leave the conveyor.
    A significant reduction in the risk of stopping the conveyor due to the timely departure of cars.

    Модульные автомойки под ключ туннельного типа

    Базовый уровень или уровень «премиум»? Выбор за Вами.

    Большей гибкости не бывает: индивидуально подбираемые модульные узлы WashTec дают Вам возможность комплектовать Вашу конвейерную мойку. Из большого разнообразия модулей Вы составите именно ту конвейерную мойку туннельного типа, которая Вам нужна, исходя из клиентского потенциала площадки, конфигурации участка, ожиданий Ваших клиентов. Вы можете выбрать как экономный базовый вариант, так и комплектацию высшего класса: скомпонуйте Вашу туннельную мойку с конвейером от 11 и до более чем 40 метров длины.

    Linear technology

    Perfect results of washing the front and rear of the car.

    The continuous development of the WashTec linear technology purposefully improves the result of washing the front and rear parts. The brushes move along the contour of the car, which guarantees a long-term impact on critical areas of the front and rear.
    Проиграть видео

    Linear movement for intensive washing

    Проиграть видео

    Linearly moving side brushes

    Проиграть видео

    Linearly moving upper brushes

    Проиграть видео

    Drying with blowing of linearly moving nozzles

    Мойки туннельного типа SoftLine² Vario

    Модули для Вашей конвейерной мойки туннельного типа.

    Выберите именно те модули конвейерной мойки, которые Вам нужны, исходя из клиентского потенциала площадки, конфигурации участка и ожиданий Ваших клиентов. Предложите Вашим клиентам новые впечатления от дизайна мойки, инновационных элементов комплектации и результата мытья, ухода, сушки.

    18 метров

    Туннельная мойка SoftLine² Vario 18м
    Туннельная мойка SoftLine² Vario 24м

    24 метра

    Туннельная мойка SoftLine² Vario 28м

    28 метров

    Туннельная мойка SoftLine² Vario 34м

    34 метра

    Туннельная мойка SoftLine² Vario 42м

    42 метра

    Туннельная мойка SoftLine² Vario SLX

    SLX

    Combinable

    Conveyor car wash that meets your wishes.

    SoftLine 2 Vario will make your car wash business unusually flexible. Do you need a compact tunnel sink with a conveyor from 14 meters in the basic configuration, or a 40-meter washing conveyor with the widest possibilities? Whatever plans you make, SoftLine2 Vario will allow you to implement them.

    Compact

    The shortest way is to the ideal result.

    The SoftLine Compact tunnel type conveyor sink is designed specifically for short halls. It confidently demonstrates its advantages already with a length of 11 meters and can be increased to 18 meters. When completing the sink, you can choose from various washing, drying and care modules. All modules are optimized so that they give the best results in a short space. SoftLine Compact is an ideal solution for those who operate a portal car wash and want to expand their car wash business.

    Takes up little space
    variations in length
    B4 12 м
    Travel dimensions
    for cars
    B4 0 м
    Managed by a small
    number of staff.
    B4 0

      Do you have a question?

      Order a free consultation

      See for yourself that we have the best ready-made solutions for your future car wash complex.
      Offer

      A car wash is a profitable investment!

      Faberon Group of companies — we are engaged in the creation of car washes of any type. The car washes built by us are rightfully considered one of the best in Russia, since modern technology is created for the convenience of customers, and due to the built-up technological process, maximum car body washing speeds are achieved with stable quality. The facilities are equipped with high-quality components from the German manufacturer "WashTec".

      Knowledge and experience

      The main advantages of tunnel type washing

      It should be noted that technological progress does not stand still and every year the device, technical equipment of car washes, as well as the chemical composition of detergents continue to improve, thereby opening up new opportunities for their owners. The Faberon company offers you to learn even more about the tunnel (tunnel) car wash by calling the specialists of our company. We will share valuable information with you and help you make the right decision in each case!

      Complex of services

      Own design bureau,
      from the sketch to the working documentation.

      Own design bureau, from the sketch to the working documentation.

      Construction works

      Ready-made solutions for professional car wash complexes.

      project office

      Own architecture and design bureau. Development of the concept of the future car wash.

      Selection of equipment

      Selection and delivery of equipment with delivery and installation throughout Russia.

      Service and maintenance

      Maintenance and transfer of experience for the successful operation of the car wash complex.

      Tunnel type conveyor sinks

      High productivity, low share of personnel costs, environmental friendliness, comfort and speed of service.

      We are pleased to offer you our experience in implementing various projects in Russia and the CIS.
      Some of the objects we have made recently
      AMK Nakhimovsky Prospekt
      St. Petersburg
      AMK AQUAMATIC
      St. Petersburg
      AMK AQUA-LUX
      Moscow oblast
      AMK AQUA-LUX
      Moscow
      AMK AQUAMATIC
      Kazan
      Advantages

      Why should you contact
      us?

      We save up to 15% of the budget
      We develop an individual project for free. The cost of the equipment costs you less than ordering from the manufacturer.
      High-quality equipment
      High-quality time-tested equipment from the world leader in the field of automatic car washing WashTec.
      Advantages of SoftLine 2

      Reliable equipment, impeccable efficiency.

      Modular
      concept
      Absolute flexibility in the choice of performance and configuration. Travel sizes for cars are up to 2.40 meters wide and up to 2.40 meters high. Stainless steel constructions: a high-pressure washing module following the contour of the car, a brush washing module and others.

      01

      Convenience of
      operation

      Patent–protected equipment is reliable, durable and maintenance-free. Minimal staff involvement. Gentle washing – thanks to the precisely adjusted operation of electronically controlled brushes.

      02

      Unified
      design

      Attractive appearance with various design elements: LED lighting on the entrance portal and on the wax processing portal, with the possibility of individual design. The possibility of choosing a conveyor in steel and plastic versions.

      03

      Innovations

      Leader of innovations in the field of automatic car washes

      WashTec is not only the world market leader, but also the leader of innovations in the car wash industry. The list of our innovations is rich: from the invention of the first portal car wash to the continuous improvement of the equipment of tunnel sinks, commercial/truck car washes and self-service car washes. From innovative digital solutions to novelties in the field of cleaning chemistry. All WashTec innovations are consistently aimed at meeting the changing needs of customers and car wash owners.

      Запасные части

      Самые высокие запросы даже в мелочах.

      Для достижения блестящих результатов мойки Вам потребуется не только совершенная техника. Не менее важен продуманный подбор моющих материалов и химических продуктов для применяемого оборудования. Используя моющие щетки марки WashTec и химические продукты нашей дочерней компании AUWA, Вы будете иметь наилучшие результаты, удовлетворенных клиентов и высокие денежные обороты.
      Our blog

      Useful information

      20.02.2020
      Tunnel car wash is a profitable business.
      23.05.2019
      Do the brushes scratch? Research in Munich.
      03.06.2019
      Turnkey washing for WashTec equipment.
      20.02.2020
      Benefits of a turnkey tunnel car wash.

      Mailing

      Do you want to get more information about the car wash business and WashTec equipment?

      Subscribe to our newsletter and receive our best materials to your mailbox. Infrequently, for free, on business.